FAQ

Frequently Asked Questions

How much does it cost to seal pavers in Florida?

Around Northeast Florida, companies publish about $1.75 to $3.25 per square foot to clean, sand and seal. A 600 square foot Fernandina Beach driveway would land near $1,050 to $1,950 at that rate. Stripping a failed coat adds $0.75 to $1.50 per square foot in one Jacksonville company's 2026 guide. For a price on your own pavers, get a free estimate online.

Is it good to seal pavers in Florida?

Yes, for pavers that have faded, gone green or lost joint sand. Sealer deepens the color, helps the sand stay put and makes routine cleaning easier. The trade-off is a fresh coat every few years. To find out whether yours are ready, call (904) 932-1301.

How often do you have to seal your pavers in Florida?

Plan on every three to five years, the range Unilock, a paver maker, gives. A Jacksonville company's 2026 guide says driveways and pool decks often need it closer to three. Sun, salt and sprinklers all shorten the life of a coat. If you are not sure how old yours is, call (904) 932-1301.

Does it cost more to seal brick pavers at an older Fernandina Beach home?

It can. A Jacksonville company's 2026 price guide says brick, travertine and natural stone need a different sealer chemistry, which can raise the cost 15 to 30 percent. The contractor should name the product before quoting. To learn which one suits your pavers, get a free estimate online.

How much is paver sealing in Florida?

Northeast Florida companies publish about $1.75 to $3.25 per square foot to clean, sand and seal. A 1,000 square foot Fernandina Beach pool deck works out to roughly $1,750 to $3,250 at that rate. Small jobs cost more per foot, and one Jacksonville company's 2026 guide lists $2.50 to $3.25 for areas under 300 square feet.

Why is paver sealing so expensive?

The price covers far more than a coat of sealer. A paver sealing company in the Fernandina Beach map results says a clean and seal takes two days, with washing, fresh joint sand and the sealer itself. A Jacksonville company's 2026 guide adds that Florida prices run a bit higher because of commercial-grade sealers and cleaners.

How long does sealer last on pavers in Florida?

Most coats last about three to five years. Unilock, a paver maker, gives that range, and a paver sealing company listed for Fernandina Beach quotes the same with proper care. Driveways and pool decks often need a new coat closer to three years.

Do pavers need to be sealed after power washing?

Sealing is optional, but new joint sand is not. A Fernandina Beach cleaning company warns that pressure washing can pull joint sand from sealed and unsealed pavers alike. A coat of sealer after the sand goes back in helps keep the color and the joints in better shape.